Differential Mode: Enter acceptable thickness value, unit will display +/- the difference from the value entered.
Alarm Mode: Enter a minimum & maximum acceptable thickness value. If measurement falls outside Hi/Lo limits, red LED will illuminate and sounds beep-er. If measurement is between Hi/Lo limits, green LED will illuminate.
Data Output: RS-232 output sends data to a serial printer, a computer or other external storage device.

DAKOTA ULTRASONICS PX Series has arrived. The variety of features offered in the PX-7 and PX-7DL allow the user to select a quality tool that will meet or exceed their specific application needs. In the Echo-to-Echo Mode you have the ability to measure the thickness of materials without removing the paint or the coating. Our 5 year limited warranty indicates how we feel about the reliability and durability of the PX SERIES.
The PX-7 is our basic precision gauge model. The PX series are packaged in an aluminum extruded body, with nickel plated aluminum end caps. The PX series gauges are typically used for thin material applications. This gauge has the ability to calibrate to a variety of different materials using a one point calibration option. Some of the features include: Scan feature (allowing the user to scan an area for the minimum thickness), alarm mode (audible & visual), differential mode (+/- from nominal thickness value), and RS232 port out.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Part number PVX

Manufactured by Dakota Ultrasonics

Range for Interface-Echo Mode: Steel .050–1.0 inch (1.27–25.4mm); Plastics from .005 inch (0.127mm)

Range for Echo-Echo Mode: Steel 0.006–0.500 inch (0.152–12.7mm)

Range for Pulse-Echo Contact: Steel 0.040–10.0 inch (1–254mm); Plastics from 0.010" (0.254mm)

Range for Echo-Echo Contact: Steel thru-paint 0.100–3.0 inches (2.54–76.2mm)

Selectable Resolution: +/- .001 inch (0.01 mm) or +/- .0001 inch (0.001 mm)

Velocity Range: .0492 to .3936 inches/μs (1250 to 9999 meters/sec)

Viewing Options: RF waveform, +/- rectified waveform, large digits with scan bar

Calibration options: One-point, two-point, selection from a material list

Alarm Mode: Set Hi and Lo tolerances with audible beeper and visual LEDs

The Dakota Ultrasonics PVX thickness gauge features an adjustable square wave pulser which provides the flexibility necessary for both high resolution and penetration requirements. Selectable viewing options include RF waveform, +/- rectified waveform and large digits with scan bar. A time based B-scan feature displays a cross section of the test material and displays the profile of the opposite surface of the material.

Other features of the Dakota ltrasonics PVX thickness gauge include hardware AGC gain control for multiple echo and thru-paint measurements, multiple calibration options including one-point, two-point or selection from a material list and 16 factory and 48 user-defined setups. The PVX is equipped with an alpha-numeric datalogger to provide increased versatility for those custom reporting needs.

The PVX thickness gauge comes complete with Windows® PC software for transferring data to and from a PC, multiple language support and a 2-year limited warranty.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Setups: 64 custom user-definable setups. Factory setups can also be edited by the user.
Selectable Transducers: Selectable transducer types with built-in dual path error correction for improved linearity.
Alarm Mode: Set hi and lo tolerances with audible beeper and visual LEDs.
Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when

The time-based B-Scan feature of the PR-8V displays a cross section of the opposite surface, allowing engine builders the ability to see the contour of the back surface in cylinders while scanning.
Use the Multi-Mode (Echo-Echo mode) feature to measure chassis tubing with or without paint and coatings. Built-in automatic gain control and selectable low, medium, and high gain settings offer the inspector the additional punch power for materials that are hard to penetrate. The variety of calibration options is just one more example of the PR-8V’s versatility. Store up to 64 custom setups. Factory setups available for common applications.
The internal Data Logger of the PR-8V has been customized for both the engine builder and the chassis inspector. Selectable cylinder mapping or general alpha numeric file storage will satisfy your reporting needs.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Range: Measures from 0.040 to 1.50 inches (0.63 to 199.99 millimeters) in casted materials.
Switch to select English or metric units.
Resolution: 0.001 inch (0.01 millimeter)
Velocity Range: .0492 to .3937 in/m s (1250 to 10,000 meters/sec)
Built-in: Stainless steel reference disk for probe zeroing.
Four readings per second for single point measurements or 16 per second in SCAN mode.
Single and Two point calibration option included.

The PR-82 sonic tester has been modified for the automotive industry. This gauge is commonly used for measuring the thickness of cylinder walls, head ports, decks, tubing, body panals, and windshields. It also has the ability to scan the length of a part to find the the minimum thickness.
The PR-82 is back-lit and the unit operates for up to 200 hours on a single set of batteries. It is protected by Dakota Ultrasonics 5 year limited warranty.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Differential Mode: Enter acceptable thickness value, unit will display +/- the difference from the value entered.
Alarm Mode: Enter a minimum acceptable thickness value. If measurement falls below minimum, red LED will illuminate and sound beeper. If measurement is above minimum value, green LED will illuminate.
Data Ouput: RS232 output sends thickness readings to a printer, computer or other

The MX-5 DL is a simple to operate Ultrasonic Thickness Gauge with an internal data logger. It offers features that make your job easier. An Alarm mode, Differential mode, high speed scanning, and data send are the main features of the MX-5 DL. The MX-5 DL will automatically log your readings in numeric order ( 1 to 1000 readings ). The gauge comes as a complete kit, ready to use, and is backed by Dakota Ultrasonics 5 year limited warranty.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
Switch to select English or metric units.
Resolution: 0.001 inch (0.01 millimeter)
Velocity Range: .0492 to .3937 in/m s
1250 to 10,000 meters/sec
Built-in: Stainless steel reference disk for probe zeroing.
Four readings per second for single point measure ments or 16 per second in scan mode captures the minimum thickness.
Single and Two point calibration option included.
Features: Differential Mode: Enter acceptable thickness value, unit will display +/- the difference from the value entered.
Alarm Mode: Enter a minimum acceptable thickness value. If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate.
Data Ouput: RS232 output sends thickness readings to a computer or other external storage device

The MX-5 is a simple to use hand-held Ultrasonic Thickness Gauge. It offers features that make your job easier. An Alarm mode, Differential mode, high speed scanning, and data send are the main features of the MX-5. The MX-5 comes as a complete kit, ready to use, and is backed by Dakota Ultrasonics 5 year limited warranty.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Differential Mode:
Enter acceptable thickness value,
unit will display+/- the difference
from the value entered.
Alarm Mode:
Enter a minimum acceptable
thickness value. If measurement
falls below minimum, red LED will
illuminate and sound beeper. If
measurement is above minmum
value, green LED will illuminate.
Data Output:
RS232 output sends data to a
serial printer, a computer or other
external storage device.

PACKAGING All Metal Case.
The units are sealed with gaskets to protect
them from harsh working environments.
SIZE 2.5”W x 4.5”H x 1.2”D. The units are small and
portable and will operate on 2 AA batteries for over 200
hours. You can take them anywhere to do the job.
FEATURES The MX Series offers features you have
requested. The Differential Mode, High Speed Scan
Mode, Alarm Mode and On-Board Data Logging.
WARRANTY All gauges are covered by a
5 year limited warranty.
SUPPORT Each member of our Sales and
Engineering staff have at least 10 years experiece
in the field of Ultrasonics. We are here to help.
AS YOU CAN SEE, the standard has been set with
the MX GAUGES. Please give us a call to
discuss your applications.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

The physical size, weight, and display resolution are just a few of the benefits of the MVX.

The adjustable square wave pulser provides the flexibility necessary for both high resolution and penetration requirements.

The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits).

The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring thru-paint and coatings in echo-echo mode.

The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.

Built-in hardware AGC gain control for thru- paint measurements in multi-mode operation.

The variety of calibration options is just one more example of MVX’s overall versatility.

The MVX has the ability to store 64 custom user-defined setups. All factory setups can be selected, edited and saved to any setup location.

MVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs.

The built-in transducer types offer increased linearity between transducers.

The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned.

Visual alarm with Hi and Lo limit settings for specific application tolerances.

Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view.

MVX also comes complete with our Windows® PC software for transferring data to and from a PC.

A basic Flaw Prove-Up Mode for use with angle beam style transducers.

Multiple language support

2 year limited warranty

Pulse-Echo Mode: (Pit & Flaw
Detection) measures from
0.025 9.999 inches (0.63 to 254
millimeters).
Echo-Echo Mode: (Thru Paint &
Coatings) measures from 0.050 to
4.0 inches (1.27 to 102 millimeters).
Range will vary +/- depending on the
thickness of coating.
Resolution: +/- .001 inches (0.01
mm)
Velocity Range:
.0492 to .3936 inches/ms
1250 to 9999 meters/sec
Single and Two point calibration
option, or selection of basic material
types
Units: English & Metri

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

The physical size, weight, and display resolution are just a few of the benefits of the MMX-7.

The time-based B-Scan feature displays a cross section of the opposite surface allowing inspectors to see the back surface contour.

Use the Multi-Mode feature to measure through and eliminate paint and coatings. Built-in automatic gain control.

Selectable low, medium, and high gain settings offer the inspector the additional punch power for materials that are hard to penetrate.

The variety of calibration options is just one more example of the MMX-7's versatility.

Store up to 64 custom setups. Factory setups are included for common applications.

MMX-7 is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting requirements.

The built-in transducer types offer increased linearity between transducers.

The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned.

Use the visual alarm to set Hi and Lo limits for applications requiring specific tolerances.

MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC, viewing B-Scans, set-ups, and general requirements.

Multiple language support

2 year limited warranty

Pulse-Echo Mode:
(Pit & Flaw Detection) measures
from 0.025 to 9.999 inches (0.63
to 254 mm).
Echo-Echo Mode: (Thru Paint
& Coatings) measures from
0.050 to 4.0 inches (1.27 to 102
mm); Range will vary +/- depending on the thickness of coating.
Resolution: +/- .001 inches
(0.01 mm)
Velocity Range:
.0492 to .3936 inches/ms
1250 to 9999 meters/sec
Single and Two point calibration
option, or selection of basic
material types.
Units: English & Metric

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

The MMX-6DL has all the features of the MMX-6 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. This gives the user the ability to store, and download the stored measurements directly to a PC using our DakView software program. The software and transfer cable are included in the MMX-6DL kit.

Range:
Pulse Echo Mode (Pit & Flaw Detection): Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Echo Echo Mode (Thru Paint & Coatings): Measures from 0.100 to 1.0 inches (2.54 to 25.4 millimeters).
Switch to select English or metric units.
Resolution: 0.001 inches (0.01 millimeters)
Velocity Range: .0492 to .3937 in/m s 1250 to 10,000 meters/sec
Built in: Stainless steel reference disk for probe zeroing.
Four readings per second for single point measurements or 16 per second in scan mode — captures the minimum thickness.
Single and Two point calibration option included

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

DAKOTA ULTRASONICS’ has succeeded in adding the final touches to the rugged MX line with the new
multi-mode MMX series. The MMX-6 and MMX-6DL have not only been combined with all the durability and
features of the MX series gauges, but have also been equipped with the ability to measure through painted
or coated materials and eliminate the thickness of the paint or coating. Our 5 year limited warranty indicates
how we feel about the reliability and durability of the new MMX Series

The MMX Series has arrived! These gauges are the answer to
both versatility and convenience in every way! The MMX series
defines versatility by combining features like: Fast Scan, Alarm
(audible/visual), and data logging, along with multi-mode for
reading through and eliminating the thickness
of painted or coated materials. The MMX demonstrates
convenience by making all these features available to the
user with just the touch of a button.
Conveniently toggle between pulse-echo mode
(detect flaws & pits), and echo-echo mode
(eliminate paint & coating thickness), to cover all
your inspection requirements. No need
to remove or allow for errors due to paint
and coatings. The MMX gauges use a highly
damped dual element style transducer for both
modes, eliminating the need to switch between
transducer types.
The MMX gauges are packaged in an all aluminum sealed case, making them rugged
and resistant to the working environment—
Dakota’s trademark.
5 Year Limited Warranty

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Transflective Color TFT Display

Broad & Narrow Band Amplifier

Square Wave Pulser (Active Edge)

Extruded Aluminium Case (IP65)

Digital Thickness Display

DAC/TCG/AWS/DGS

Automatic Calibration

PC/Video/Analog Outputs

Long Battery Life (Li-ion pack)

Large Memory Capacity

Curved Surface Correction

Alphanumeric Notes

Trig function

Help feature

The DFX series ultrasonic flaw detectors are full featured digital scopes designed to handle the simplest to the most difficult applications. Whether the application requires high penetration for materials that are difficult to measure, or high resolution for precision aerospace parts, the DFX series flaw detectors are equipped with the necessary features to do the job. They can go where you go, to do the work you do, saving you time and money, making your inspections fast and accurate.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Transflective Color TFT Display

Broad & Narrow Band Amplifier

Square Wave Pulser (Active Edge)

Digital Thickness Display

DAC/TCG/AWS/DGS

Automatic Calibration

PC/Video/Analog Outputs

Long Battery Life (Li-ion pack)

Large Memory Capacity

Curved Surface Correction

Alphanumeric Notes

Trig function

Help feature

The DFX Series digital ultrasonic flaw detectors have been designed to meet a variety of application requirements, according to feature sets and performance requirements. There are 4 models to select from, according your application demands. These are packaged in an all aluminum housing for rugged working environments.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Transflective Color TFT Display

Broad & Narrow Band Amplifier

Square Wave Pulser (Active EdgeTM)

Extruded Aluminum Case(IP65)

USB / RS232 / Video / Analog Outputs

Trig Functions

Curved Surface Correction

DAC/TCG/AWS/DGS (Defect Sizing)

Automatic Calibration

Long Battery Life (Li-Ion Pack)

Water Path Correction (638 only)

Fast Setup Screen Facility

Alphanumeric Text

Help Facility

The DFX Series digital ultrasonic flaw detectors have been designed to meet a variety of application requirements, according to feature sets and performance requirements. There are 4 models to select from, according your application demands. These are packaged in an all aluminum housing for rugged working environments.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Transflective Color TFT Display

Broad & Narrow Band Amplifier

Square Wave Pulser (Active EdgeTM)

Extruded Aluminum Case(IP65)

USB / RS232 / Video / Analog Outputs

Trig Functions

Curved Surface Correction

DAC/TCG/AWS/DGS (Defect Sizing)

Automatic Calibration

Long Battery Life (Li-Ion Pack)

Water Path Correction (638 only)

Fast Setup Screen Facility

Alphanumeric Text

Help Facility

The DFX Series digital ultrasonic flaw detectors have been designed to meet a variety of application requirements, according to feature sets and performance requirements. There are 4 models to select from, according your application demands. These are packaged in an all aluminum housing for rugged working environments.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Multimode for thickness measurements or pit and flaw detection

Two-channels: dual pulsers and receivers

Coating thickness measurements

Display update 25 times per second

Temperature compensated

Meter Range: 0.025 to 19.99 inches (thickness); 0.001 to 0.100 inches (coating thickness)

Resolution: ±0.001 inches

Adjustable gain settings

32Mb storage capacity

Stores up to 64 custom setups

Bi-directional RS232 serial port

Factory calibration traceable to national standards

2 year limited warranty

The Dakota CMX-DL+ ultrasonic thickness gauge has all the features of the CMX-DL plus a full featured A-Scan presentation with RF and rectified viewing options. The Dakota CMX-DL+ ultrasonic thickness gauge is equipped with 3 fully adjustable gates (start, stop, width, & threshold) as well as a 20dB boost/cut attenuator which offers added flexibility for transducer types and applications.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Multimode for thickness measurements or pit and flaw detection

Two-channels: dual pulsers and receivers

Coating thickness measurements

Display update 25 times per second

Temperature compensated

Meter Range: 0.025 to 19.99 inches (thickness); 0.001 to 0.100 inches (coating thickness)

Resolution: ±0.001 inches

Adjustable gain settings

32Mb storage capacity

Stores up to 64 custom setups

Bi-directional RS232 serial port

Factory calibration traceable to national standards

2 year limited warranty

The Dakota CMX-DL ultrasonic thickness gauge has all the features of the CMX plus a huge storage capacity with multiple file structures. Select between two file formats: sequential, with auto identifiers, or a standard alpha numeric grid format. The storage capacity of the Dakota CMX-DL ultrasonic thickness gauge is impressive. With graphics on up to 16,000 readings (material & Coating) with a B-Scan can be stored with all features and gauges settings per reading. With graphics off up to 210,000 readings, including material, coating, and min & max readings can be stored.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Powered by a 100MHz DSP platform using FPGA technology.

Two Channels - Dual pulsers and receivers.

Up to 140Hz pulse repetition rate.

Display update rate of 25 times per second.

Adjustable gain settings - vlow, low, med, hi, vhi.

Automatic gain control (AGC).

Time corrected gain (TCG).

Massive data storage (32 Megabit of non-volatile RAM).

Measurement modes: Pulse-Echo, Pulse-Echo w/Coating, Pulse-Echo w/Temperature Compensation, Echo-Echo, Echo-Echo Verify & Coating Only. u Automatic: probe zero, probe recognition, and temperature compensation.

Stores up to 64 custom setups for specific applications.

High Speed Scan of up to 50 readings per second.

Audible/visual alarm with hi and lo limit settings.

Built-in differential mode for QC inspections.

Time based B-Scan feature for cross section material scans.

Data storage formats: Alpha numeric

grid and sequential w/auto identifier.

Windows PC software included.

2 year limited warranty.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Measures from 0.025 to 19.999 Weight: 10 ounces (with batteries).
Size: 2.5 W x 4.5 H x 1.24 D inches (63.5 W x 114.3 H x 31.5 D mm).
inches (0.63 to 500 millimeters).

The MX-1 will hold a single velocity, making it the perfect choice where one material is being tested day after day. With the preset velocity in the gauge, you simply turn on the gauge and you are ready to work. The velocity is set in the MX-1 with a simple software program that is supplied with the unit.
Physical
Weight: 10 ounces (with batteries).
Size: 2.5 W x 4.5 H x 1.24 D inches (63.5 W x 114.3 H x 31.5 D mm).
Operating Temperature: -20Þ to 120ÞF (-30Þ to 50ÞC).
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Keypad
Sealed membrane that is resistant to both water and petroleum products.
Four or five tactile-feedback keys.
Transducer
Dual-element (transmit and receive).
1 to 10 MHz frequency range.
Locking quick disconnect LEMO connectors.
4 foot cable.
Custom transducers available for special applications.
Power Source
Two 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 200 hours on alkaline and 130 hours on NiCad.
Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.
Display
Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
Backlight is selectable on/off/auto (illuminates only when taking a measurement).
Measurements displayed in inches, inches/microsecond, millimeters, and meters/second. Bar graph indicates stability of reading.
Software
Comes complete with cable and software to transfer the velocity to the gauge.
Certification
Factory calibration traceable to national standards.
Warranty (all MX units)
5 year limited.
Measuring
Velocity Settings:
The MX-1 has 1 custom velocity setting.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Weight: 10 ounces (with batteries).
Size: 2.5 W x 4.5 H x 1.24 D inches (63.5 W x 114.3 H x 31.5 D mm).

The MX-2 is ideal for the person that tests a few different materials regularly. The MX-2 contains 8 velocities of common materials and 2 velocities that the user can set using a simple software program.

Physical
Weight: 10 ounces (with batteries).
Size: 2.5 W x 4.5 H x 1.24 D inches (63.5 W x 114.3 H x 31.5 D mm).
Operating Temperature: -20Þ to 120ÞF (-30Þ to 50ÞC).
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Keypad
Sealed membrane that is resistant to both water and petroleum products.
Four or five tactile-feedback keys.
Transducer
Dual-element (transmit and receive).
1 to 10 MHz frequency range.
Locking quick disconnect LEMO connectors.
4 foot cable.
Custom transducers available for special applications.
Power Source
Two 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 200 hours on alkaline and 130 hours on NiCad.
Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.
Display
Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
Backlight is selectable on/off/auto (illuminates only when taking a measurement).
Measurements displayed in inches, inches/microsecond, millimeters, and meters/second. Bar graph indicates stability of reading.
Software
Comes complete with cable and software to transfer the velocity to the gauge.
Certification
Factory calibration traceable to national standards.
Warranty (all MX units)
5 year limited.
Measuring
Velocity Settings:
The MX-2 has 8 set velocities and 2 that are custom to the user’s application. The set velocities are as follows:
1. Steel 4340 .233
2. Stainless Steel 303 .223
3. Aluminum 2024 .251
4. Cast Iron .179
5. Plexiglass .106
6. PVC .094
7. Polystyrene .092
8. Polyurethane .070
9. Custom
10. Custom

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.