Available Pressure:
PSIG: -12 to 30 PSI /-0.8 to 2 bar (electric pump)
-12 to 150 PSI /-0.8 to 10 bar (electric pump)
-12 to 300 PSI / -0.8 to 20 bar (manual pump)
Pressure accuracy: ±0.025% of full scale on internal sensor module dependent for external sensors
Dimensions: 8” high x 4” wide x 2-3/8” deep (20 cm x 10 cm x 6 cm)
Weight: 2.5 pounds (1.2 kg)

• Pump that Generates Pressure up to 300 PSI and Vacuum up to -12 PSI
• Operates on 8 Standard Alkaline AA Batteries
• Pt100 RTD input for Temperature Measurement with Accuracy of 0.1°C (0.2°F)
• 24 Volt Loop Power to Operate Device under Test
• Large LCD with Backlight
• External Pressure Module Interface Supports all 29 BetaPort-P Pressure Modules
• Store and Recall up to 5 User Defined Setups
• Pressure Displayed in the User's Choice of 19 Engineering Units
• Switch Test is Automatic Using Internal Sensor or External Pressure Module
• Ideal for Gas Flow Calibration (Custody Transfer) Applications
• Quik-Test Pressure Calibration Connectors Available

Ranges
mA: 0 to 24 mA, max, load 1000 Ohms
RTD: Pt100, -50 to 150°C
Engineering Units
psi, bar, mbar, kPa, kgcm2, cmH2O@4°C, cmH2O@20°C, mH2O@4°C, mH2O@20°C, inH2O@4°C, inH2O@20°C, inH2O@60°F, mmHg@0°C, inHg@0°C, ftH2O@4°C, ftH2O@20°C, ftH2O@60°F
Instrument Power Supply: 24 VDC at 24 mA
Accuracy
Add 0.005% FS/°C outside of 15 to 35°C
mA: ±0.015% of reading ± 2 counts (simulation and measurement)
Volts: ±0.015% of reading ± 2 counts (measurement only)
Temperature: ±0.1°C (0.2°F) (measurement only) (Pt100 RTD)
General
Integrated internal electrically operated pneumatic pump:
generates -12 PSI to 150 PSI pressure (-0.8 to 10 Bar, -8 to 100 kPa)
Manual pump version: -12 to 300 PSI / -0.8 to 20 Bar
Environmental:
Operating Temperature: -10 °C to +50 °C
Storage Temperature: -20 °C to +60 °C
Power Requirements:
Battery: Eight (8) standard Alkaline AA batteries
Battery Life: 300 pump cycles to 150 PSI minimum 1000 pump cycles to 30 PSI
Physical:
Dimensions: 8” high x 4” wide x 2-3/8” deep (20 cm x 10 cm x 6 cm)
Weight: 2.5 pounds (1.2 kg)
Connections:
Pressure: 1/8” female NPT
Electrical: standard banana jacks
RTD: 4 pin LEMO style
External module: 6 pin LEMO style
Included Accessories: NIST traceable calibration certificate, batteries installed, test leads, test hose fittings, user guide, carrying case.

• Apraksts Angļu valodā (PDF)

- Cena: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.