The new PACE precision pressure indicator brings together the latest measurement technology from GE to offer an elegant, flexible and economical solution to pressure measurement for test, calibration and monitoring.
PACE employs digitally characterized pressure sensors which offer the quality, stability and precision associated with this latest generation of piezo-resistive and resonant devices.
PACE1000 offers a wide choice of standard pressure ranges, with three levels of precision to ensure that PACE1000 can accommodate specification and budget requirements.
The colour touch screen display of the PACE1000 can be configured by a user to indicate up to three pressure measurements from a possible five sensor inputs; three internal sensors and two external universal pressure modules.
The indication configuration extends to an ability to display in a numeric or graph format and also a differential of P1-P2 if more than two sensors are installed. The indicated display can be logged over a customized time period, sample rate and trigger. All the pressure sensor measurement can be re-transmitted via one of the communication ports.
The Airfield task is supplied as standard with the Barometric option and enables the user to display QFE, QFF or QNH in pressure units or as altitude in feet or meters.

PACE 1000 Options

Leak Test
Leak Test measures leak rate over the measure dwell time. At the start of the test, the instrument measures the applied test pressure of the user system. The instrument records the pressure change during measure dwell time. On completion the display shows the leak rate results, with leak rate per second or per minute in the current pressure units selected.

Switch Test – standard with the Analogue Output or Voltage Free Contacts option
Switch Test automates the testing of pressure switch devices. Following the test, displayed is the pressure at which contacts open and close and the switch hysteresis. Switch Test task can also be set to capture switch toggle max, min and average values.

Analogue Output
The Analogue Output can be programmed via the setup menu screen to output a signal proportional to the instrument range selected. This allows the instrument to interface with PC or PLC I/O cards, remote displays, chart recorders or other data logging equipment.

Users can select outputs of 0 to 10 V, 0 to 5 V, -5 to 5 V and 0/4 to 20 mA. Precision with respect to host instrument measured pressure 0.05% FS over the host instrument operating temperature range, variable update rate to 80 readings per second. The option is programmable between minimum and FS pressure for proportional output against pressure.

Volt Free Contacts
Volt Free Contacts enable control of peripheral devices such as vacuum pumps, ovens, etc. Each VFC option has three independent volt-free NO/NC relay contacts. A number of conditions can be set within a PACE1000 instrument to trigger a relay toggling its contacts.

Aeronautical aviation
Available ranges: 55,000ft/650 knots or 75,000ft/1000 knots
Indication available in pure aeronautical units:
Altitude – feet or meters
Air speed – knots or km/hour, mph
Mach – mach number
Derived pressure at mean sea level and barograph for barometric applications.

Pressure measurement

IPS pressure ranges:	25, 70, 200, 350 and 700 mbar gauge, 1, 2, 3.5, 7, 10, 20, 35, 70, 100, 135, 172, 210 bar gauge, 350, 420, 700 & 1000 bar absolute 0.35, 1, 3, 5, 10, 15, 30, 50, 100, 150, 300, 500, 1000, 1500, 2000, 2500, 3000 psi gauge, 5000, 6000, 10000 & 14500 psi absolute 2.5, 7, 20, 35, 70, 100, 200, 350, 700 kPa gauge, 1, 2, 3.5, 7, 10, 13.5, 17.2, 21 MPa gauge, 35, 42, 70 & 100 MPa absolute All gauge versions available with negative calibration as standard. For pseudo absolute/gauge pressure range – select any range and add barometric option
IRS pressure ranges:	: 35-1300, 35-2600 & 35-3500 mbar absolute 0.5-19, 0.5-38 & 0.5-50 psi absolute 3.5-130, 3.5-260 & 3.5-350 kPa absolute
IRS-B barometric reference ranges:	750-1150 mbar absolute, 10.9-16.7 psi absolute, 75-115 kPa absolute
Over range indication:	10% above mbar/bar full scale pressure range.
Pressure media:	Not suitable for use with Oxygen Pressure ranges 3.5 bar and above compatible with Stainless Steel 316 and Hastelloy C 276 Gauge ranges below 3.5 bar and absolute ranges below 3500 mbar abs: Dry, oil free, non-corrosive gas or air. For low pressure ranges below 350 mbar or 5 psi, please consult your sales representative

Pirkt PACE1000 - precīzs spiediena indikators
Ja Jums ir kādi jautājumi par šo produktu, nekautrējieties, lūdzu sazināties ar mums pa
e-pastu: This email address is being protected from spambots. You need JavaScript enabled to view it. vai pa tālruni: +370 640 20 911.
PACE1000 - precīzs spiediena indikators, cena: --- euro