Ūdens iela 23, Riga, Latvija +370 640 20 911 info@tekknow.lv
P3800 - hidrauliskais spiediena etalons
  • Pressure ranges to 60,000 psi (4000 bar)
  • Select from two accuracy classes; 0.02% or 0.015% of reading
  • Includes hand pump and intensifier for generating high pressures
  • Tungsten carbide piston and cylinder provides long term stability and durability
  • Mass set can be trimmed to local gravity FOC

The Pressurements P3800 Series High Pressure Hydraulic Deadweight Testers are the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features and options designed to improve accuracy, increase reliability, and simplify operation, the P3800 Series can be used to calibrate virtually any high pressure sensing device including transducers, transmitters, gauges, pressure switches or other calibrators.

Three models are available, P3830, P3840 and P3860 offering pressure ranges of 30,000, 40,000 and 60,000 psi respectively (2000, 3000 and 4000 bar). All models are available in two accuracy classes, 0.02% or 0.015% of Reading. The Series P3800 offers an accurate and economical approach to calibrating high pressure devices.

Instrument base
The instrument base includes all items required for operation. A high quality hand pump is coupled to a 7 to 1 intensifier, allowing the operator to easily generate high pressure in the system. An oil reservoir is included so the pump to be re-charged when calibrating large volume devices. A test station is provided for connecting the device under test to the P3800 Series. Adjustable feet and the level vial allow the operator to insure the instrument is level to achieve the ultimate performance. A piston float reference allows the operator to determine when the piston is in the ideal, “mid float” position.

The piston/cylinder is the “heart” of the deadweight tester. P3800 Series pistons are manufactured from tungsten carbide, which provides excellent long term stability, durability, and extremely low coefficients for temperature and pressure.

Weight sets
Standard weight masses are series 3 non-magnetic stainless steel. Each mass is marked with the serial number of the instrument and the nominal pressure value. Select either PSI, bar kgf/cm2 or MPa pressure units. Presscal software can be used to support additional pressure units.

Gravity correction
Gravity varies significantly with geographical locations. Each instrument can be calibrated to local gravity a no additional cost. If unspecified, instruments are calibrated to standard gravity at 980.665 cm/s2.

  • PressCal software for pressure calculations and certificate generation
  • Conversion weight sets

Pressure Ranges

P3830 500 to 30,000 psi, or 40 to 2,000 bar, or 4 to
200 MPa, or 40 to 2000 kgf/cm2
P3840 500 to 40,000 psi, or 40 to 2,600 bar, or 4 to
260 MPa, or 40 to 2600 kgf/cm2
P3860 500 to 60,000 psi or 40 to 4,000 bar or 4 to
400 MPa or 40 to 4000 kgf/cm2


Accuracy* Standard accuracy is 0.02% of Reading*. Optional accuracy of 0.015% of Reading is available. ISO/IEC 17025 accredited calibration is provided with each instrument. *Accuracy is based on % of Reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10%, ± (accuracy class) x 10% of the piston range. See the “Guide for the Uncertainty Analysis in Pressure when Using P3000 Series Deadweight Testers” technical note for more information.

Materials of Construction

Standard weight material Series 3 non-magnetic, austenitic, stainless steel
Weight density 7.8 g/cm3
Piston Material Tungsten carbide with nickel binder
Cylinder Material Tungsten Carbide with cobalt binder
Thermal Coefficient of Expansion 11 ppm/°C


Test port adapters 9/16 – 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP & 3/4 BSP
Instrument Weight 66 lbs. (30 Kg) Instrument Base only
Instrument Size 18 in. X 13.5 in. X 19 in. (455 X 340 X 478 mm)
Reservoir Volume 235 cc (14.3 cu.in.)
Intensifier ratio 7 to 1
Seal Materials Nitrile
Operating Fluid Dioctyl Sebacate (DOS), our reference 55-600


Presscal software Windows based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Supports additional 12 pressure units (bar, mbar, MPa, kPa, psi, kg/cm2, atm, in H2O, mH2O, mmH2O, inHg, mmHg).
Conversion Weight Sets For applications that require nominal pressure increments in measurement units different than the main unit, conversion weight sets are available. Available measurement units are: PSI, bar kgf/cm2 or MPa.

Pirkt P3800 - hidrauliskais spiediena etalons
Ja Jums ir kādi jautājumi par šo produktu, nekautrējieties, lūdzu sazināties ar mums pa
e-pastu: This email address is being protected from spambots. You need JavaScript enabled to view it. vai pa tālruni: +370 640 20 911.
P3800 - hidrauliskais spiediena etalons, cena: --- euro


Parakstoties adresātu jaunumiem, jums tiks sūtītas jaunākās ziņas no mums.

SIA "Tek Know Baltic" Latvija, Riga, Ūdens iela 23, LV-1007

Tel: +370 640 20 911, E-pasts: info@tekknow.lv

© 2018, SIA "Tek Know Baltic". Visas tiesības aizsargātas.